Winders  operate on 3 volts DC which is supplied by the included  AC/DC plug-in adapter which converts standard North American 110 volt current.

Turns per day (TPD) can be set for 650, 785, 950, 1150 and 1440 using the dip switches at top left in the photograph.  

The direction of turns can be set by the rocker switch in the center for clockwise, counter-clockwise and bi-directional

A push-button on and off switch is on the right.

Your watch is rests on a soft foam cushion - it actually feels like memory foam.   

The microprocessor controlled motor rotates the watch 360 degrees and then pauses until the next cycle.  Settings for TPD are shown in the illustration below.

   If you have any additional questions about my "rhd" watch winders, please feel free to call me at 443-722-6817